How To Use A Controller Pak In Project64

Download Article

This wikiHow teaches you lot how to set up an Xbox 360 controller for utilise with the Project64 emulator plan on a Windows computer. For this to work, you lot must have either a hard-wired Xbox 360 controller or a wireless adapter from Microsoft.

i

Unplug your Xbox 360. If you take an Xbox 360 within connexion range, unplug information technology from its power source to foreclose your controller from connecting accidentally to the console.
2
Make certain that y'all take a wired controller. In club to use an Xbox 360 controller on Project64 without an adapter, the controller must use a not-removable wire as its ability source.^[i]
- You cannot use a "plug and charge" cable here.
- If you want to utilise a wireless controller, y'all'll have to buy a Microsoft Xbox 360 Wireless Gaming Receiver unit. If so, make sure that the receiver is from Microsoft and not a tertiary-political party retailer.
Ad
3
Plug into the estimator your controller. The cease of the controller'south wire should fit into 1 of your reckoner'due south USB ports.
- If yous're using a wireless receiver, plug the receiver into a USB port and look for a dark-green light on the receiver. The receiver must be plugged into a "powered" USB port, so try a different USB port if the receiver'south calorie-free doesn't show up.
four
Expect for the drivers to cease downloading. Upon plugging in your controller or receiver, Windows will automatically look for and download software to help your calculator use the controller. This should only take a few minutes, after which indicate y'all'll receive a notification that your controller is set up to use.
- Y'all volition need an Net connection for this process to start.
5
Connect your controller. Skip this footstep if you're using a wired controller. Press the circular Connect push on the wireless receiver, and so turn on the controller past pressing and holding the Guide push, which is the Xbox logo in the middle of the controller, and press the "Connect" push button on the forepart of the controller.
- One time the controller'southward Guide push button stops blinking, your controller is connected to the calculator.

ane

Open Project64. Double-click the Project64 app icon, which resembles a light-green, stylized "PJ" side by side to a small, ruddy "64" icon.
2

Click Options . This tab is at the top of the window. A drop-down menu volition announced.
3

Click Configure Controller Plugin… . It's near the bottom of the drop-down menu. Doing and then opens the controller settings window.
4
Look for a controller'due south paradigm. If you lot encounter a large epitome of a controller in the center of the folio, your controller is showing upwards on Project64; if non, attempt restarting Project64.
- If restarting Project64 doesn't work, restart your figurer so try to connect over again.
five

Change the controls. To map an activity to a different button on the controller, click the action's name to the left of the keyboard push, then press the button that you want to employ for that action on your controller.
six
Save your controller configuration. Click Save Profile at the top of the window, enter a name for the configuration, and click Save. You'll exist able to load the saved settings by re-opening the Configure Controller Plugin... menu, clicking Load Profile, and double-clicking the saved settings file.
- It's helpful to save your controller'due south profile as something identifying (east.g., the name of the game with which y'all desire to use the controller's specific controls).

Add New Question

Question

What can I exercise if I am unable to configure the analog properly?

The mouse tends to activate if you keep moving it while trying an input. If you lot hold your mouse still subsequently clicking the next department, this should provide ample time to then put both of your analog motions. Older versions of PJ64, like PJ64k tend to accept issues with registering the right analog stick. Either learn to bargain without, or update your current version of PJ64.
Question

How tin can you save your controller configurations?

In all versions of PJ64 (fifty-fifty PJ64k) go to Options > Configure Controller Plugin > Save Profile. A window should pop-upwards indicating the file location where you would similar to put your controller configurations may be loaded upwardly afterwards with Options > Configure Controller Plugin > Load Contour from that file location. In later versions of PJ64 similar 2.3.2 an option exists at the bottom chosen Save. This won't save the controller configurations to the computer but will save it to PJ64 instead The adjacent time you open information technology on your figurer. If you lost your default configurations, you tin use Options > Configure Controller Plugin > Default Configuration and click Save.
Question

What about for the newer versions of Project 64? This doesn't work for those.

Actually it does! PJ64 ii.3.two automatically finds your joypad (Xbox360 controller, etc.). The correct analog stick is available. Just be conscientious and stop your mouse movements when entering your configurations, and you should be fine to enter your joypad'south (Xbox360) buttons.

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Project64 often has trouble identifying controllers when it is running while connecting the controller. For best results, connect the controller, so open Project64.

Advertizing

Project64 is not available for Mac computers.
Downloading ROMs for games that yous don't already ain is both generally illegal and confronting Nintendo's terms of use.

Most This Article

Article Summary Ten

1. Connect controller to Xbox.
2. Open Project64.
3. Click Options.
4. Click Configure Controller Plugin.
5. Map actions to controls.
6. Click Salvage Profile.
7. Enter a name for the configuration.
eight. Click Save.

Did this summary help yous?

Thanks to all authors for creating a folio that has been read 411,046 times.

Did this article help you?